{"title":"Abrasive Buffing Wheels","description":"\u003cp\u003e\u003cspan\u003eCoated Abrasive Airway buffs are designed with flexible grinding applications in mind. Irregular and regular folding adapt to contoured shapes and aid in deburring, edge rounding, and fine grinding.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNon-Woven Airway buffs are designed for light to medium duty applications where coated abrasives are too aggressive or not applicable. The pleated design provides a more uniform finish than full disc wheels and help prevent rippling in your finish. Used to produce decorative finishes, remove parting lines, for light deburring, breaking edges, sealer sanding, and rust removal.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"hilzinger-10-x-3-non-woven-abrasive-satin-airway-wheel-medium","title":"10\" x 3\" Premium Non-Woven Abrasive Satin Airway Wheel (Medium, 4 Ply)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium non-woven abrasive material for sanding, blending, and satin finishing on flat or contoured metal parts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasives of the highest quality differ from the standard fare through consistency and efficiency: strictly controlled webbing thickness, density, and resin\/aluminum oxide abrasive distribution throughout the material ensure consistent and even cutting action even as the buff wears. \u003c\/p\u003e\n\u003cp\u003eNon-Woven Airway buffs are designed for light to medium duty applications where coated abrasives are too aggressive or not applicable. The pleated design provides a more uniform finish than full disc wheels and help prevent rippling in your finish. Used to produce decorative finishes, remove parting lines, for light deburring, breaking edges, sealer sanding, and rust removal.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Non-woven abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives that adheres to the webbing via globules of resin.\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk. \u003cspan data-mce-fragment=\"1\"\u003ePlease note that non-woven airways operate best at significantly lower maximum RPMs; excessive running speeds may cause material to melt or tear, significantly reducing overall lifespan (and resulting in a much less consistent finish).\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger America","offers":[{"title":"Default Title","offer_id":47577917948188,"sku":"HZ-NW-M10","price":50.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/Hilzinger_America_NW_Medium_10x3_Buff_E-Commerce.png?v=1724194271"},{"product_id":"hilzinger-12-x-5-non-woven-abrasive-satin-airway-wheel-medium","title":"12\" x 5\" Premium Non-Woven Abrasive Satin Airway Wheel (Medium, 4 Ply)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium non-woven abrasive material for sanding, blending, and satin finishing on flat or contoured metal parts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasives of the highest quality differ from the standard fare through consistency and efficiency: strictly controlled webbing thickness, density, and resin\/aluminum oxide abrasive distribution throughout the material ensure consistent and even cutting action even as the buff wears. \u003c\/p\u003e\n\u003cp\u003eNon-Woven Airway buffs are designed for light to medium duty applications where coated abrasives are too aggressive or not applicable. The pleated design provides a more uniform finish than full disc wheels and help prevent rippling in your finish. Used to produce decorative finishes, remove parting lines, for light deburring, breaking edges, sealer sanding, and rust removal.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Non-woven abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives that adheres to the webbing via globules of resin.\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 12″ x 5″ = 1,000 RPM\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk. \u003cspan data-mce-fragment=\"1\"\u003ePlease note that non-woven airways operate best at significantly lower maximum RPMs; excessive running speeds may cause material to melt or tear, significantly reducing overall lifespan (and resulting in a much less consistent finish).\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger America","offers":[{"title":"Default Title","offer_id":47577986531612,"sku":"HZ-NW-M12","price":60.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/Hilzinger_America_NW_Medium_12x5_Buff_E-Commerce.png?v=1724195250"},{"product_id":"hilzinger-10-x-3-non-woven-abrasive-satin-airway-wheel-fine","title":"10\" x 3\" Premium Non-Woven Abrasive Satin Airway Wheel (Fine, 4 Ply)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium non-woven abrasive material for sanding, blending, and satin finishing on flat or contoured metal parts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasives of the highest quality differ from the standard fare through consistency and efficiency: strictly controlled webbing thickness, density, and resin\/aluminum oxide abrasive distribution throughout the material ensure consistent and even cutting action even as the buff wears. \u003c\/p\u003e\n\u003cp\u003eNon-Woven Airway buffs are designed for light to medium duty applications where coated abrasives are too aggressive or not applicable. The pleated design provides a more uniform finish than full disc wheels and help prevent rippling in your finish. Used to produce decorative finishes, remove parting lines, for light deburring, breaking edges, sealer sanding, and rust removal.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Non-woven abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives that adheres to the webbing via globules of resin.\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk. \u003cspan data-mce-fragment=\"1\"\u003ePlease note that non-woven airways operate best at significantly lower maximum RPMs; excessive running speeds may cause material to melt or tear, significantly reducing overall lifespan (and resulting in a much less consistent finish).\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger America","offers":[{"title":"Default Title","offer_id":47578046759196,"sku":"HZ-NW-F10","price":47.49,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/Hilzinger_America_NW_Fine_10x3_Buff_E-Commerce.png?v=1724194230"},{"product_id":"hilzinger-12-x-5-non-woven-abrasive-satin-airway-wheel-fine","title":"12\" x 5\" Premium Non-Woven Abrasive Satin Airway Wheel (Fine, 4 Ply)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium non-woven abrasive material for sanding, blending, and satin finishing on flat or contoured metal parts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasives of the highest quality differ from the standard fare through consistency and efficiency: strictly controlled webbing thickness, density, and resin\/aluminum oxide abrasive distribution throughout the material ensure consistent and even cutting action even as the buff wears. \u003c\/p\u003e\n\u003cp\u003eNon-Woven Airway buffs are designed for light to medium duty applications where coated abrasives are too aggressive or not applicable. The pleated design provides a more uniform finish than full disc wheels and help prevent rippling in your finish. Used to produce decorative finishes, remove parting lines, for light deburring, breaking edges, sealer sanding, and rust removal.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Non-woven abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives that adheres to the webbing via globules of resin.\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 12″ x 5″ = 1,000 RPM\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk. \u003cspan data-mce-fragment=\"1\"\u003ePlease note that non-woven airways operate best at significantly lower maximum RPMs; excessive running speeds may cause material to melt or tear, significantly reducing overall lifespan (and resulting in a much less consistent finish).\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger America","offers":[{"title":"Default Title","offer_id":47578052591900,"sku":"HZ-NW-F12","price":56.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/Hilzinger_America_NW_Fine_12x5_Buff_E-Commerce_2b3fbef2-0ed4-4cae-839b-5a73eae78953.png?v=1724195185"},{"product_id":"hilzinger-10-x-3-non-woven-abrasive-satin-airway-wheel-very-fine","title":"10\" x 3\" Premium Non-Woven Abrasive Satin Airway Wheel (Very Fine, 4 Ply)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium non-woven abrasive material for sanding, blending, and satin finishing on flat or contoured metal parts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasives of the highest quality differ from the standard fare through consistency and efficiency: strictly controlled webbing thickness, density, and resin\/aluminum oxide abrasive distribution throughout the material ensure consistent and even cutting action even as the buff wears. \u003c\/p\u003e\n\u003cp\u003eNon-Woven Airway buffs are designed for light to medium duty applications where coated abrasives are too aggressive or not applicable. The pleated design provides a more uniform finish than full disc wheels and help prevent rippling in your finish. Used to produce decorative finishes, remove parting lines, for light deburring, breaking edges, sealer sanding, and rust removal.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Non-woven abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives that adheres to the webbing via globules of resin.\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk. \u003cspan data-mce-fragment=\"1\"\u003ePlease note that non-woven airways operate best at significantly lower maximum RPMs; excessive running speeds may cause material to melt or tear, significantly reducing overall lifespan (and resulting in a much less consistent finish).\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger America","offers":[{"title":"Default Title","offer_id":47578129760540,"sku":"HZ-NW-VF10","price":44.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/Hilzinger_America_NW_Very_Fine_10x3_Buff_E-Commerce.png?v=1724194631"},{"product_id":"hilzinger-12-x-5-non-woven-abrasive-satin-airway-wheel-very-fine","title":"12\" x 5\" Premium Non-Woven Abrasive Satin Airway Wheel (Very Fine, 4 Ply)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium non-woven abrasive material for sanding, blending, and satin finishing on flat or contoured metal parts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasives of the highest quality differ from the standard fare through consistency and efficiency: strictly controlled webbing thickness, density, and resin\/aluminum oxide abrasive distribution throughout the material ensure consistent and even cutting action even as the buff wears. \u003c\/p\u003e\n\u003cp\u003eNon-Woven Airway buffs are designed for light to medium duty applications where coated abrasives are too aggressive or not applicable. The pleated design provides a more uniform finish than full disc wheels and help prevent rippling in your finish. Used to produce decorative finishes, remove parting lines, for light deburring, breaking edges, sealer sanding, and rust removal.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Non-woven abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives that adheres to the webbing via globules of resin.\u003c\/p\u003e\n\u003cp\u003eNon-woven abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 12″ x 5″ = 1,000 RPM\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk. \u003cspan data-mce-fragment=\"1\"\u003ePlease note that non-woven airways operate best at significantly lower maximum RPMs; excessive running speeds may cause material to melt or tear, significantly reducing overall lifespan (and resulting in a much less consistent finish).\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger America","offers":[{"title":"Default Title","offer_id":47578149945628,"sku":"HZ-NW-VF12","price":53.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/Hilzinger_America_NW_Very_Fine_12x5_Buff_E-Commerce.png?v=1724195298"},{"product_id":"10-x-3-premium-coated-abrasive-strip-ring-airway-buffing-wheel-120-grit","title":"10\" x 3\" Premium Coated Abrasive Strip Ring Airway Buffing Wheel (120 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium coated abrasive strips give this buff the flexibility to deburr, round edges, and finely grind contoured parts with more aggression than a non-woven airway.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNarrow 120 grit cloth sanding belt strips are held by a steel clinch ring and allowed to play across the work surface, leveling textured surfaces and pits with ease while producing a smooth finish roughly equivalent to a 180 grit sanding disc. Combines the fast cut of coated abrasives with the flexibility of a buffing wheel; finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to flex and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003eWhere practical, we recommend trying our V-Fold Abrasive Finger Buff in 180 grit before proceeding to this buff from a Strip Ring Airway in 180 grit. It's shape and folding lends to increased aggression without using a more coarse grit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52555134271772,"sku":"HZ-CASR-10-120G","price":67.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumStripRingCoatedAbrasiveAirwayBuffE-Commerce.png?v=1752679930"},{"product_id":"12-x-5-premium-coated-abrasive-strip-ring-airway-buffing-wheel-120-grit","title":"12\" x 5\" Premium Coated Abrasive Strip Ring Airway Buffing Wheel (120 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium coated abrasive strips give this buff the flexibility to deburr, round edges, and finely grind contoured parts with more aggression than a non-woven airway.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNarrow 120 grit cloth sanding belt strips are held by a steel clinch ring and allowed to play across the work surface, leveling textured surfaces and pits with ease while producing a smooth finish roughly equivalent to a 180 grit sanding disc. Combines the fast cut of coated abrasives with the flexibility of a buffing wheel; finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to flex and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003eWhere practical, we recommend trying our V-Fold Abrasive Finger Buff in 180 grit before proceeding to this buff from a Strip Ring Airway in 180 grit. It's shape and folding lends to increased aggression without using a more coarse grit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 12″ x 5″ = 1,000 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52561186390300,"sku":"HZ-CASR-12-120G","price":78.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumStripRingCoatedAbrasiveAirwayBuffE-Commerce.png?v=1752679930"},{"product_id":"10-x-3-premium-coated-abrasive-strip-ring-airway-buffing-wheel-180-grit","title":"10\" x 3\" Premium Coated Abrasive Strip Ring Airway Buffing Wheel (180 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium coated abrasive strips give this buff the flexibility to deburr, round edges, and finely grind contoured parts with more aggression than a non-woven airway.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNarrow 180 grit cloth sanding belt strips are held by a steel clinch ring and allowed to play across the work surface, leveling textured surfaces and pits with ease while producing a smooth finish roughly equivalent to a 280 grit sanding disc. Combines the fast cut of coated abrasives with the flexibility of a buffing wheel; finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to flex and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003eWhere practical, we recommend trying our V-Fold Abrasive Finger Buff in 320 grit before proceeding to this buff from a Strip Ring Airway in 320 grit. It's shape and folding lends to increased aggression without using a more coarse grit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52561219223836,"sku":"HZ-CASR-10-180G","price":67.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumStripRingCoatedAbrasiveAirwayBuffE-Commerce.png?v=1752679930"},{"product_id":"12-x-5-premium-coated-abrasive-strip-ring-airway-buffing-wheel-180-grit","title":"12\" x 5\" Premium Coated Abrasive Strip Ring Airway Buffing Wheel (180 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium coated abrasive strips give this buff the flexibility to deburr, round edges, and finely grind contoured parts with more aggression than a non-woven airway.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNarrow 180 grit cloth sanding belt strips are held by a steel clinch ring and allowed to play across the work surface, leveling textured surfaces and pits with ease while producing a smooth finish roughly equivalent to a 280 grit sanding disc. Combines the fast cut of coated abrasives with the flexibility of a buffing wheel; finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to flex and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003eWhere practical, we recommend trying our V-Fold Abrasive Finger Buff in 320 grit before proceeding to this buff from a Strip Ring Airway in 320 grit. It's shape and folding lends to increased aggression without using a more coarse grit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 12″ x 5″ = 1,000 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52561219584284,"sku":"HZ-CASR-12-180G","price":78.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumStripRingCoatedAbrasiveAirwayBuffE-Commerce.png?v=1752679930"},{"product_id":"10-x-3-premium-coated-abrasive-strip-ring-airway-buffing-wheel-320-grit","title":"10\" x 3\" Premium Coated Abrasive Strip Ring Airway Buffing Wheel (320 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium coated abrasive strips give this buff the flexibility to deburr, round edges, and finely grind contoured parts with more aggression than a non-woven airway.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNarrow 320 grit cloth sanding belt strips are held by a steel clinch ring and allowed to play across the work surface, leveling textured surfaces and pits with ease while producing a smooth finish roughly equivalent to a 500 grit sanding disc. Combines the fast cut of coated abrasives with the flexibility of a buffing wheel; finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to flex and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52561221746972,"sku":"HZ-CASR-10-320G","price":67.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumStripRingCoatedAbrasiveAirwayBuffE-Commerce.png?v=1752679930"},{"product_id":"12-x-5-premium-coated-abrasive-strip-ring-airway-buffing-wheel-320-grit","title":"12\" x 5\" Premium Coated Abrasive Strip Ring Airway Buffing Wheel (320 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium coated abrasive strips give this buff the flexibility to deburr, round edges, and finely grind contoured parts with more aggression than a non-woven airway.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNarrow 320 grit cloth sanding belt strips are held by a steel clinch ring and allowed to play across the work surface, leveling textured surfaces and pits with ease while producing a smooth finish roughly equivalent to a 500 grit sanding disc. Combines the fast cut of coated abrasives with the flexibility of a buffing wheel; finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to flex and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 12″ x 5″ = 1,000 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52561222140188,"sku":"HZ-CASR-12-320G","price":78.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumStripRingCoatedAbrasiveAirwayBuffE-Commerce.png?v=1752679930"},{"product_id":"5-x-19mm-premium-miniature-coated-abrasive-strip-ring-airway-buffing-wheel-120-180-320-grit","title":"5\" x 19mm Premium Miniature Coated Abrasive Strip Ring Airway Buffing Wheel (120, 180, 320 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium coated abrasive strips give this buff the flexibility to deburr, round edges, and finely grind contoured parts with more aggression than a non-woven airway. Perfect for challenging pieces like cast turbo housings!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNarrow 120\/180\/320 grit cloth sanding belt strips are held by a steel clinch ring and allowed to play across the work surface, leveling textured surfaces and pits with ease while producing a smooth finish roughly equivalent to a 180\/280\/500 grit sanding disc. Combines the fast cut of coated abrasives with the flexibility of a buffing wheel; finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to flex and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.\u003c\/p\u003e\n\u003cp\u003eThese specialty airway buffing wheels are normally reserved for use in polishing cutlery; Spectrum has imported these especially for tackling challenging areas like under heavy truck cabs, between fuel tanks and fenders, and even on items like turbo housings. Each measures 127mm (5\") x 19mm, with the center rings extending only 2 inches from tooth to tooth; single buffs are mounted via our new \u003cspan style=\"color: rgb(239, 139, 34);\"\u003e\u003ca rel=\"noopener\" style=\"color: rgb(239, 139, 34);\" title=\"Spectrum Miniature Airway Self-Centering Safety Flanges\" href=\"https:\/\/spectrumalberta.ca\/products\/spectrum-minature-airway-self-centering-safety-flange-19mm-id-wheels\" target=\"_blank\"\u003eminiature flanges\u003c\/a\u003e\u003c\/span\u003e, or two to three buffs by combining these flanges with our \u003cspan style=\"color: rgb(239, 139, 34);\"\u003e\u003ca rel=\"noopener\" style=\"color: rgb(239, 139, 34);\" title=\"Spectrum Handheld Polisher Hard Anodized Arbor Extensions\" href=\"https:\/\/spectrumalberta.ca\/products\/spectrum-handheld-polisher-arbor-extension-5-8-11\" target=\"_blank\"\u003earbor extenders\u003c\/a\u003e\u003c\/span\u003e (this provides a similar buffing face to that of a full size 10\" or 12\" buff). While easily used with a small variable speed grinder (like one of our favourite sanding tools, the Dewalt DWE43240INOX), these buffs can be used on drills or flex-shaft tools with commonly available 5\/8\"-11 adapters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 5″ x 19mm = 2,000 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"120 Grit (finishes like 180)","offer_id":52561826742556,"sku":"HZ-MCASR-5-120G","price":14.99,"currency_code":"CAD","in_stock":false},{"title":"180 Grit (finishes like 280)","offer_id":52561826775324,"sku":"HZ-MCASR-5-180G","price":14.99,"currency_code":"CAD","in_stock":false},{"title":"320 Grit (finishes like 500)","offer_id":52561826808092,"sku":"HZ-MCASR-5-320G","price":14.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThum5MiniStripRingCoatedAbrasiveBuffE-Commerce.png?v=1752688842"},{"product_id":"10-x-3-premium-coated-abrasive-v-fold-abrasive-finger-airway-buffing-wheel-120-grit","title":"10\" x 3\" x 1\/2\"AH Premium Coated Abrasive V-Fold Abrasive Finger Airway Buffing Wheel (120 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium, folded coated abrasive strips allow for some flexibility while providing a more narrow, aggressive face for grinding than a strip ring airway - perfect for diamond plate, step grating, slots, grooves, and counter-sunk areas.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eWide, V-folded 120 grit cloth sanding belt fingers are tacked consecutively in a cardboard center, more aggressively grinding coatings leveling textures surfaces even between obstacles like step grating and diamond plate. More aggressive than the strip ring buff, this produces a finish roughly equivalent to a 150 grit sanding disc. Like the strip ring buffs, finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to splay out and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Cardboard center has a 1\/2\" arbor hole suitable for 5\/8\" handheld grinding tools. Requires end flanges for safe mounting - reversed self-centering flanges will work.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52562149966108,"sku":"HZ-CAVAF-10-120G","price":82.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumV-FoldCoatedAbrasiveFingerBuffE-Commerce.png?v=1752693269"},{"product_id":"12-x-5-premium-coated-abrasive-v-fold-abrasive-finger-airway-buffing-wheel-120-grit","title":"12\" x 5\" x 1\/2\"AH Premium Coated Abrasive V-Fold Abrasive Finger Airway Buffing Wheel (120 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium, folded coated abrasive strips allow for some flexibility while providing a more narrow, aggressive face for grinding than a strip ring airway - perfect for diamond plate, step grating, slots, grooves, and counter-sunk areas.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eWide, V-folded 120 grit cloth sanding belt fingers are tacked consecutively in a cardboard center, more aggressively grinding coatings leveling textures surfaces even between obstacles like step grating and diamond plate. More aggressive than the strip ring buff, this produces a finish roughly equivalent to a 150 grit sanding disc. Like the strip ring buffs, finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to splay out and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Cardboard center has a 1\/2\" arbor hole suitable for 5\/8\" handheld grinding tools. Requires end flanges for safe mounting - reversed self-centering flanges will work.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52562888392988,"sku":"HZ-CAVAF-12-120G","price":89.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumV-FoldCoatedAbrasiveFingerBuffE-Commerce.png?v=1752693269"},{"product_id":"10-x-3-premium-coated-abrasive-v-fold-abrasive-finger-airway-buffing-wheel-180-grit","title":"10\" x 3\" x 1\/2\"AH Premium Coated Abrasive V-Fold Abrasive Finger Airway Buffing Wheel (180 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium, folded coated abrasive strips allow for some flexibility while providing a more narrow, aggressive face for grinding than a strip ring airway - perfect for diamond plate, step grating, slots, grooves, and counter-sunk areas.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eWide, V-folded 180 grit cloth sanding belt fingers are tacked consecutively in a cardboard center, more aggressively grinding coatings leveling textures surfaces even between obstacles like step grating and diamond plate. More aggressive than the strip ring buff, this produces a finish roughly equivalent to a 220 grit sanding disc. Like the strip ring buffs, finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to splay out and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Cardboard center has a 1\/2\" arbor hole suitable for 5\/8\" handheld grinding tools. Requires end flanges for safe mounting - reversed self-centering flanges will work.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52562900517148,"sku":"HZ-CAVAF-10-180G","price":82.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumV-FoldCoatedAbrasiveFingerBuffE-Commerce.png?v=1752693269"},{"product_id":"12-x-5-premium-coated-abrasive-v-fold-abrasive-finger-airway-buffing-wheel-180-grit","title":"12\" x 5\" x 1\/2\"AH Premium Coated Abrasive V-Fold Abrasive Finger Airway Buffing Wheel (180 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium, folded coated abrasive strips allow for some flexibility while providing a more narrow, aggressive face for grinding than a strip ring airway - perfect for diamond plate, step grating, slots, grooves, and counter-sunk areas.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eWide, V-folded 180 grit cloth sanding belt fingers are tacked consecutively in a cardboard center, more aggressively grinding coatings leveling textures surfaces even between obstacles like step grating and diamond plate. More aggressive than the strip ring buff, this produces a finish roughly equivalent to a 220 grit sanding disc. Like the strip ring buffs, finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to splay out and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Cardboard center has a 1\/2\" arbor hole suitable for 5\/8\" handheld grinding tools. Requires end flanges for safe mounting - reversed self-centering flanges will work.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52562901205276,"sku":"HZ-CAVAF-12-180G","price":89.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumV-FoldCoatedAbrasiveFingerBuffE-Commerce.png?v=1752693269"},{"product_id":"10-x-3-premium-coated-abrasive-v-fold-abrasive-finger-airway-buffing-wheel-320-grit","title":"10\" x 3\" x 1\/2\"AH Premium Coated Abrasive V-Fold Abrasive Finger Airway Buffing Wheel (320 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium, folded coated abrasive strips allow for some flexibility while providing a more narrow, aggressive face for grinding than a strip ring airway - perfect for diamond plate, step grating, slots, grooves, and counter-sunk areas.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eWide, V-folded 320 grit cloth sanding belt fingers are tacked consecutively in a cardboard center, more aggressively grinding coatings leveling textures surfaces even between obstacles like step grating and diamond plate. More aggressive than the strip ring buff, this produces a finish roughly equivalent to a 400 grit sanding disc. Like the strip ring buffs, finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to splay out and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Cardboard center has a 1\/2\" arbor hole suitable for 5\/8\" handheld grinding tools. Requires end flanges for safe mounting - reversed self-centering flanges will work.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52562925093148,"sku":"HZ-CAVAF-10-320G","price":82.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumV-FoldCoatedAbrasiveFingerBuffE-Commerce.png?v=1752693269"},{"product_id":"12-x-5-premium-coated-abrasive-v-fold-abrasive-finger-airway-buffing-wheel-320-grit","title":"12\" x 5\" x 1\/2\"AH Premium Coated Abrasive V-Fold Abrasive Finger Airway Buffing Wheel (320 Grit)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePremium, folded coated abrasive strips allow for some flexibility while providing a more narrow, aggressive face for grinding than a strip ring airway - perfect for diamond plate, step grating, slots, grooves, and counter-sunk areas.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eWide, V-folded 320 grit cloth sanding belt fingers are tacked consecutively in a cardboard center, more aggressively grinding coatings leveling textures surfaces even between obstacles like step grating and diamond plate. More aggressive than the strip ring buff, this produces a finish roughly equivalent to a 400 grit sanding disc. Like the strip ring buffs, finish and stock removal can be modified with speed and pressure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease RPMs and use reduced pressure to grind more aggressively.\u003c\/li\u003e\n\u003cli\u003eReduce RPMs and use increased pressure to allow the strips to splay out and blend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike paper discs, much less prone to glazing and loading. Especially useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving tar, adhesive, silicone, etc.\u003c\/li\u003e\n\u003cli\u003eRemoving Durabrite\/Accushield coatings\u003c\/li\u003e\n\u003cli\u003eGrinding down areas inaccessible to conventional sanding tools (drive wheel water channel, diamond plate, step grating, welds, cast aluminum, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoated abrasive strips have abrasive grains bonded to a flexible cloth backing, whereas non-woven abrasives consist of abrasive grains embedded in a nylon fiber matrix. Coated abrasives are often preferred where aggressive stock removal and increased lifespan is desired.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eRecommendations\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePairs with\u003c\/span\u003e: Coated abrasive buffs are not used with buffing compounds; the abrasive effect is (typically) achieved by aluminum oxide or silicon carbide abrasives bonded to a cloth backing. They can, however, be paired with sanding greases to produce a more forgiving cut and extend their lifespan.\u003c\/p\u003e\n\u003cp\u003eCoated abrasive buffing wheels do not need raking. Cardboard center has a 1\/2\" arbor hole suitable for 5\/8\" handheld grinding tools. Requires end flanges for safe mounting - reversed self-centering flanges will work.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHilzinger Max RPM\u003c\/span\u003e: 10″ x 3″ = 1,300 RPM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003ePlease note that Hilzinger-Thum\/Hilzinger America will not warranty buffing wheels run at excessive speeds. Do so at your own risk.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003eHilzinger-Thum has been making buffing and grinding tools for over 120 years and is one of the few companies recommended by Menzerna for buffing wheels. Using the highest quality raw materials available, Hilzinger America in Ohio continues their tradition by producing customized buffing wheels for Spectrum.\u003c\/p\u003e","brand":"Hilzinger-Thum","offers":[{"title":"Default Title","offer_id":52562926076188,"sku":"HZ-CAVAF-12-320G","price":89.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/HilzingerThumV-FoldCoatedAbrasiveFingerBuffE-Commerce.png?v=1752693269"},{"product_id":"ncs-600-combination-interleaf-coated-and-non-woven-abrasive-1-4-shank-mounted-flapwheel","title":"NCS 600 Combination Interleaf Coated and Non-Woven Abrasive 1\/4\" Shank-Mounted Flapwheel","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSmall, shank-mounted combination flapwheel for brush\/satin finishing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NCS 600 finishing mop is characterized by both high material removal and a fine surface pattern; it is made up of an alternating arrangement of non-woven flaps and coated abrasive cloth. Synthetic aluminum oxide grain is enhanced by a dual resin bond: the first affixing it to the backing and the second covering the grain, embedding it firmly and contributing to the long service life of the abrasive. The non-woven material between the abrasive flaps provides for a uniform finish throughout the mop's lifespan.\u003c\/p\u003e\n\u003cp\u003eBuilt-in 1\/4\" shaft mounts to die grinders, flexible shaft equipment, and drills.\u003c\/p\u003e\n\u003ch5\u003eRecommendations\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMax RPM\u003c\/span\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.5\" Diameter x 1\" Wide: 15,200 RPM\u003c\/li\u003e\n\u003cli\u003e2\" Diameter x 1\" Wide: 12,200 RPM\u003c\/li\u003e\n\u003cli\u003e3\" Diameter x 2\" Wide: 7,600 RPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe Klingspor corporation was founded as a glue factory in Siegen in 1893 by Johann Friedrich Klingspor. In 1899, the company began with the production of abrasives. This initial venture was followed by the market introduction of countless innovations such as the waterproof abrasive paper or the abrasive mop. Today, Klingspor produces tens of thousands of abrasive mops and hundreds of thousands of cut off and grinding discs daily, and has a catalog of over 50,000 products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Klingspor","offers":[{"title":"3\" x 2\" \/ Coarse Non-Woven and 60 Grit","offer_id":53246492442908,"sku":"KR-NCS600-299500","price":26.49,"currency_code":"CAD","in_stock":true},{"title":"3\" x 2\" \/ Medium Non-Woven and 150 Grit","offer_id":53241456492828,"sku":"KR-NCS600-258946","price":26.49,"currency_code":"CAD","in_stock":true},{"title":"3\" x 2\" \/ Very Fine Non-Woven and 240 Grit","offer_id":53241456525596,"sku":"KR-NCS600-258947","price":26.49,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/KlingsporNCS600ComboFlapWheelE-Commerce.png?v=1761605374"},{"product_id":"ncw-600-s-combination-interleaf-coated-and-non-woven-abrasive-satin-finishing-drum","title":"NCW 600 S Combination Interleaf Coated and Non-Woven Abrasive Satin Finishing Drum","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSatin finishing drum for metals.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile standard belt and flapwheel operations can produce a coarse brushed finish, the NCW 600 S combines non-woven abrasive and coated abrasive cloth flaps in a radial arrangement to produce an ultra-fine satin finish. As the flaps wear down, fresh grit is exposed to the workpiece, resulting in a more consistent finish over the lifespan of the drum. The outcome is a matte-shiny or matte surface that displays ultra-fine scratches, so-called satin finish lines; utilizing synthetic aluminum oxide abrasive, this satin finishing drum stands out with a combination of surface refinement, effective stock removal, and exceptional surface refinement.\u003c\/p\u003e\n\u003cp\u003eThese drums are mounted to burnisher tools or to standard grinders with the help of a \u003ca rel=\"noopener\" title='Burnisher Adapter for 5\/8\"-11 Grinders' href=\"https:\/\/spectrumalberta.ca\/products\/angle-grinder-adapter-for-coated-abrasive-and-non-woven-abrasive-burnisher-drums-5-8-11\" target=\"_blank\"\u003especial burnishing adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eRecommendations\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMax RPM\u003c\/span\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4-5\/16\" Diameter: 3,300 RPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe Klingspor corporation was founded as a glue factory in Siegen in 1893 by Johann Friedrich Klingspor. In 1899, the company began with the production of abrasives. This initial venture was followed by the market introduction of countless innovations such as the waterproof abrasive paper or the abrasive mop. Today, Klingspor produces tens of thousands of abrasive mops and hundreds of thousands of cut off and grinding discs daily, and has a catalog of over 50,000 products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Klingspor","offers":[{"title":"4-5\/16\" x 4\" \/ Coarse Non-Woven and 80 Grit","offer_id":53244961915164,"sku":"KR-NCW600S-320246","price":72.99,"currency_code":"CAD","in_stock":false},{"title":"4-5\/16\" x 4\" \/ Medium Non-Woven and 150 Grit","offer_id":53244961947932,"sku":"KR-NCW600S-320248","price":72.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/KlingsporNCW600SSatinfinishingdrumsforStainlesssteel_MetalsE-Commerce.png?v=1761666686"},{"product_id":"nfw-600-s-non-woven-abrasive-satin-finishing-drum","title":"NFW 600 S Non-Woven Abrasive Satin Finishing Drum","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSatin finishing drum for metals.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile standard belt and flapwheel operations can produce a coarse brushed finish, the NFW 600 S utilizes dense non-woven abrasive flaps in a radial arrangement to produce an ultra-fine satin finish. As the flaps wear down, fresh grit is exposed to the workpiece, resulting in a more consistent finish over the lifespan of the drum. The outcome is a matte-shiny or matte surface that displays ultra-fine scratches, so-called satin finish lines; utilizing synthetic aluminum oxide abrasive, this satin finishing drum stands out with a combination of surface refinement and exceptional surface refinement over and above the NCW 600 S combination drums. Because it grinds and finish more gently, non-woven abrasives alone remove material less rapidly than a combination drum.\u003c\/p\u003e\n\u003cp\u003eThese drums are mounted to burnisher tools or to standard grinders with the help of a \u003ca href=\"https:\/\/spectrumalberta.ca\/products\/angle-grinder-adapter-for-coated-abrasive-and-non-woven-abrasive-burnisher-drums-5-8-11\" title='Burnisher Adapter for 5\/8\"-11 Grinders' rel=\"noopener\" target=\"_blank\"\u003especial burnishing adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eRecommendations\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMax RPM\u003c\/span\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4-5\/16\" Diameter: 3,300 RPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eBrand\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe Klingspor corporation was founded as a glue factory in Siegen in 1893 by Johann Friedrich Klingspor. In 1899, the company began with the production of abrasives. This initial venture was followed by the market introduction of countless innovations such as the waterproof abrasive paper or the abrasive mop. Today, Klingspor produces tens of thousands of abrasive mops and hundreds of thousands of cut off and grinding discs daily, and has a catalog of over 50,000 products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Klingspor","offers":[{"title":"4-5\/16\" x 4\" \/ Coarse Non-Woven","offer_id":53245159538972,"sku":"KR-NFW600S-320253","price":68.49,"currency_code":"CAD","in_stock":false},{"title":"4-5\/16\" x 4\" \/ Medium Non-Woven","offer_id":53245159571740,"sku":"KR-NFW600S-320254","price":68.49,"currency_code":"CAD","in_stock":false},{"title":"4-5\/16\" x 4\" \/ Very Fine Non-Woven","offer_id":53245214982428,"sku":"KR-NFW600S-320255","price":72.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/KlingsporNFW600SSatinfinishingdrumsforStainlesssteel_MetalsE-Commerce.png?v=1761669452"},{"product_id":"angle-grinder-adapter-for-coated-abrasive-and-non-woven-abrasive-burnisher-drums-5-8-11","title":"Angle Grinder Adapter for Coated Abrasive and Non-Woven Abrasive Burnisher Drums (5\/8\"-11)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAdapter allows you to mount satin finishing drums to standard variable speed grinders and polishers without purchasing a dedicated burnisher tool.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSuitable for both dual and quad-keyway mounting drums like our Klingspor NCW and NFW satin drums, this adapter - combined with a small washer for clearance (not included) - allows standard grinding tools to act as burnishers.\u003c\/p\u003e\n\u003ch5 style=\"text-align: left;\"\u003eRecommendations\u003c\/h5\u003e\n\u003cp\u003eBurnishing tools come with special shields to protect the end user that standard grinders do not. We recommend utilizing gloves, protective eyewear, protective clothing, a respirator, and whatever grinding shield you have available to minimize risk while using this adapter.\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":53245339074844,"sku":null,"price":38.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/burnishingadapterforgrinder.png?v=1761671026"},{"product_id":"premium-coated-abrasive-mounted-flap-wheel","title":"Premium Coated Abrasive Mounted Flap Wheel","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eMounted flap wheels are excellent for producing a coarse brushed finish or as a first step in producing satin finished and fully polished rim vent holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFlexible flaps are arranged radially around a center core allowing high removal and finishing rates with reduced pressure and fatigue from operators. The flexibility of the flaps allows excellent control and conformability on contours and inside or around intricate parts. As the grains wear away, so does the cloth backing, continually exposing fresh abrasive material and sharp cutting grains. The variety of shapes and sizes available provide versatility in grinding, deburring and polishing flat or contoured surfaces. Built-in 1\/4\" shaft mounts to die grinders, flexible shaft equipment, and drills.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eRecommendations\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMax RPM\u003c\/span\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Diameter x 1\" Wide: 30,000 RPM\u003c\/li\u003e\n\u003cli\u003e2\" Diameter x 1\" Wide: 25,000 RPM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spectrum Alberta Ltd.","offers":[{"title":"60 Grit \/ 1\" x 1\" x 1\/4\"","offer_id":53942591422748,"sku":"SPS-FW-60-1","price":10.49,"currency_code":"CAD","in_stock":true},{"title":"60 Grit \/ 2\" x 1\" x 1\/4\"","offer_id":53942599942428,"sku":"SPS-FW-60-2","price":15.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/Spectrum_2x1_Coated_Abrasive_Flap_Wheel_60_Grit.png?v=1775601055"},{"product_id":"premium-interleaf-combination-coated-and-non-woven-abrasive-mounted-flap-wheel","title":"Premium Interleaf Combination Coated and Non-Woven Abrasive Mounted Flap Wheel","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eMounted interleaf wheels combine material removal and blending capabilities in a single tool; excellent for satin finishing rim vent holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecially-produced interleaf flap wheels provide an especially smooth and balanced feel compared to traditionally-produced flap \"logs\". Flexible dual-ply coated abrasive flaps and non-woven abrasive flaps are arranged radially around a center core allowing for combined material removal and blending with reduced pressure and fatigue from operators. The flexibility of the flaps allows excellent control and conformability on contours and inside or around intricate parts. As the grains wear away, so does the cloth and nylon material, continually exposing fresh abrasive material and sharp cutting grains. The variety of shapes and sizes available provide versatility in grinding, deburring and polishing flat or contoured surfaces. Built-in 1\/4\" shaft mounts to die grinders, flexible shaft equipment, and drills.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eRecommendations\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMax RPM\u003c\/span\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Diameter x 1\" Wide: 20,000 RPM\u003c\/li\u003e\n\u003cli\u003e2\" Diameter x 1\" Wide: 15,000 RPM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spectrum Alberta Ltd.","offers":[{"title":"Medium \u0026 80 Grit \/ 1\" x 1\" x 1\/4\"","offer_id":53942634086684,"sku":null,"price":10.49,"currency_code":"CAD","in_stock":true},{"title":"Medium \u0026 80 Grit \/ 2\" x 1\" x 1\/4\"","offer_id":53942634119452,"sku":null,"price":15.49,"currency_code":"CAD","in_stock":true},{"title":"Fine \u0026 120 Grit \/ 1\" x 1\" x 1\/4\"","offer_id":53942636904732,"sku":null,"price":10.49,"currency_code":"CAD","in_stock":true},{"title":"Fine \u0026 120 Grit \/ 2\" x 1\" x 1\/4\"","offer_id":53942636937500,"sku":null,"price":15.49,"currency_code":"CAD","in_stock":true},{"title":"Very Fine \u0026 180 Grit \/ 1\" x 1\" x 1\/4\"","offer_id":53942636970268,"sku":null,"price":10.49,"currency_code":"CAD","in_stock":true},{"title":"Very Fine \u0026 180 Grit \/ 2\" x 1\" x 1\/4\"","offer_id":53942637003036,"sku":null,"price":15.49,"currency_code":"CAD","in_stock":true},{"title":"Very Fine \u0026 320 Grit \/ 1\" x 1\" x 1\/4\"","offer_id":53942637035804,"sku":null,"price":10.49,"currency_code":"CAD","in_stock":true},{"title":"Very Fine \u0026 320 Grit \/ 2\" x 1\" x 1\/4\"","offer_id":53942637068572,"sku":null,"price":15.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/Spectrum2x1InterleafFlapWheel80GritMedium.png?v=1775601187"},{"product_id":"premium-non-woven-abrasive-mounted-flap-wheel","title":"Premium Non-Woven Abrasive Mounted Flap Wheel","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eMounted non-woven abrasive wheels provide provide a fine satin finish on rim vent holes, resulting in a surface ready for mirror finishing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecially-produced non-woven flap wheels provide an especially smooth and balanced feel compared to traditionally-produced flap \"logs\". Flexible satin flaps conform to contoured surfaces without altering part geometry or damaging intricate features. Densely arranged flaps provide continuous cutting action throughout life, while resisting heat and loading. As the grains wear away, so does the nylon webbing, continually exposing fresh abrasive material and sharp cutting grains. The variety of shapes and sizes available provide versatility in deburring and polishing flat or contoured surfaces. Built-in 1\/4\" shaft mounts to die grinders, flexible shaft equipment, and drills.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eRecommendations\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMax RPM\u003c\/span\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Diameter x 1\" Wide: 20,000 RPM\u003c\/li\u003e\n\u003cli\u003e2\" Diameter x 1\" Wide: 15,000 RPM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spectrum Alberta Ltd.","offers":[{"title":"Very Fine \/ 1\" x 1\" x 1\/4\"","offer_id":53942649356572,"sku":"SPS-NWFW-VF-1","price":10.49,"currency_code":"CAD","in_stock":true},{"title":"Very Fine \/ 2\" x 1\" x 1\/4\"","offer_id":53942649389340,"sku":"SPS-NWFW-VF-2","price":15.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/files\/Spectrum2x1Non-WovenFlapWheelVeryFine.png?v=1775601240"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6723\/1004\/collections\/Hilzinger_America_NW_Medium_10x3_Buff_E-Commerce.png?v=1711672194","url":"https:\/\/spectrumalberta.ca\/collections\/abrasive-buffing-wheels.oembed?page=2","provider":"Spectrum Alberta Ltd.","version":"1.0","type":"link"}