Osborn (Jackson Lea) – D32 Tripoli
Aggressive cutting compound for non-ferrous metals.
Fast-cut, greasy tripoli composition commonly selected to remove sanding marks and belt lines from copper, brass, and other non-ferrous metals. Spectrum recommends pairing this compound with stiff buffs like our Matchless purple and orange airways.
66 in stock
While economical, tripoli compounds tend to leave a hazy finish on aluminum that will need to be cleaned up by a colouring compound before finishing; as a result, we generally recommend Menzerna 439T and Menzerna P14F as primary cutting compounds on aluminum.
Pairs with: Matchless Orange Airway Buffing Wheel, Matchless Orange/Yellow Layered Airway Buffing Wheel, Matchless Purple Airway Buffing Wheel
Alternative products: Menzerna 439T, Menzerna P14F, Kocour SS17, Matchless 8B56
Typical application: Metal finishing.
Precautions: Do not breathe dust during use, contains silica. Wear appropriate safety clothing and respiratory protection. Generated dust exposure can irritate eyes and skin.
|Dimensions||25.5 × 6 × 5 cm|